Topic

A Winter Water Challenge

This topic has 147 replies, 43 voices, and was last updated 4 months, 1 week ago by jscott.

Viewing 25 posts - 1 through 25 (of 148 total)

1 2 3 4 5 6 →

Author

Posts
Nov 24, 2020 at 9:51 am #3685491

Ryan Jordan
Admin

@ryan
Locale: Central Rockies

OK, here’s the problem of the day.

I’m planning a 50-mile trek in SE Wyoming in the next few weeks. Generally below the snowline, but temps are cold here now so water is frozen.

From a scouting trip along part of my route this week:

There is water under the ice, just a trickle, and I didn’t have anything with me that I could break through and access it. The big rocks around the creek could be used, but they were all frozen into the ground.

Other than carrying a geologist’s hammer (I’m not kidding), any thoughts on how you’d manage water on a trip like this, if the only sources were frozen ice, and there’s no snow available?

Nov 24, 2020 at 1:23 pm #3685545

Roger Caffin
BPL Member

@rcaffin
Locale: Wollemi & Kosciusko NPs, Europe

Two thoughts:

A bit of fallen timber thumped down onto the ice

A boot heel thumped down on the ice

It does seem to me that the ice will be brittle, and if you can pick what looks like a weak point you should be OK. Exactly where you find the weak points – that I am not 100% sure. Maybe a pool a short distance away from a rock is worth a try: the ice might flex but the rock won’t. Pack off for this exercise I suggest, and trekking poles for balance.

Cheers

Nov 24, 2020 at 1:28 pm #3685548

PaulW
BPL Member

@peweg8
Locale: Western Colorado

My first thought was using a small hatchet (or hammer) to hopefully chop through to running water. Otherwise, it seems you’re stuck using something to break the ice into chunks for melting. I’m looking forward to your trip report on this one!

Nov 24, 2020 at 1:48 pm #3685551

Philip Tschersich
BPL Member

@philip-ak
Locale: Kodiak Alaska

A small coal chisel and you could use a rock for the hammer?

Nov 24, 2020 at 1:57 pm #3685552

Roger Caffin
BPL Member

@rcaffin
Locale: Wollemi & Kosciusko NPs, Europe

Remote inverted canister stove used as an oxy-torch?
Not entirely silly, mind you.

Cheers

Nov 24, 2020 at 2:44 pm #3685564

BlackHatGuy
Spectator

@sleeping
Locale: The Cascades

Wouldn’t a nice, solid tent stake that you already carry work? I know you said the rocks were frozen into the water, but I’m assuming that there are other rocks nearby on land that would not be, that you could use as a hammer. If you don’t think the tent stakes are strong enough for pounding like that, carrying a tenpenny nail should do the trick.

Nov 24, 2020 at 3:03 pm #3685566

Ryan Jordan
Admin

@ryan
Locale: Central Rockies

Rocks were really difficult to dislodge – they were frozen solid into the ground.

The ice in the creek was several inches thick, and the water running under the ice was just a trickle.

A 20-pound rock thrown into the ice did nothing but dent the surface a little. Boot heel – nope. At least not with Hokas.

A tent stake was futile. It would be a ton of work with any kind of stabbing/chiseling tool.

Someone on Instagram suggested a climbing ice screw. That seems to me to be potentially feasible, and then some kind of suction pump to pull the water out from the hole.

Nov 24, 2020 at 3:10 pm #3685567

Matt Dirksen
BPL Member

@namelessway
Locale: Mid Atlantic

1) Find what looks to be a deep pool, and perhaps dig a hole close to the edge. At some depth, its possible free flowing water will be present.

2) How about whip out the stove and heat up the pot real nice (or your spade), and use that to break into the ice.

Nov 24, 2020 at 3:31 pm #3685569

BlackHatGuy
Spectator

@sleeping
Locale: The Cascades

It sounds like not much will work, so my updated thoughts would be to go somewhere else… :-)

Nov 24, 2020 at 3:41 pm #3685570

Roger Caffin
BPL Member

@rcaffin
Locale: Wollemi & Kosciusko NPs, Europe

Ice screw – that sounds more like it.

dig a hole close to the edge.
I suspect not a chance: the soil will have moisture in it from the creek before it froze, and the moisture in the soil will now be frozen for some depth.

A 20-pound rock thrown into the ice did nothing but dent the surface a little.
That is ICE!

Find a large pool which might be more brittle?
A stove would work, but it would take a lot of fuel.
1 gram of C4?

Else, yeah, go elsewhere.

Cheers

Nov 24, 2020 at 3:50 pm #3685573

Philip Tschersich
BPL Member

@philip-ak
Locale: Kodiak Alaska

Carry a chunk of some pyrophoric material like plutonium. Put it on a string so you can retrieve it after it melts through the ice.

Nov 24, 2020 at 3:53 pm #3685574

Todd T
BPL Member

@texasbb
Locale: Pacific Northwest

Cordless drill and a drinking straw? :-)

Seriously, though, what about a plain old ice pick to chip out chunks for melting?

Nov 24, 2020 at 3:56 pm #3685576

Roger Caffin
BPL Member

@rcaffin
Locale: Wollemi & Kosciusko NPs, Europe

Carry a chunk of some pyrophoric material like plutonium
But what about the weight of the lead screening?
And what would BLM/Parks/?? say about that anyhow? What would the NSA say?

Ice pick – or maybe a pterodactyl?

Cheers

Nov 24, 2020 at 4:26 pm #3685582

Philip Tschersich
BPL Member

@philip-ak
Locale: Kodiak Alaska

You are already putting the plutonium in your water so I figured you wouldn’t worry about any shielding. And you could carry a light isotope, like PU228. Leave the PU247 for car camping.

Nov 24, 2020 at 4:41 pm #3685583

Roger Caffin
BPL Member

@rcaffin
Locale: Wollemi & Kosciusko NPs, Europe

C4!
Cheers

Nov 24, 2020 at 4:52 pm #3685586

BlackHatGuy
Spectator

@sleeping
Locale: The Cascades

A bushcraft hand auger, like this one, might work. It weighs ~11 oz.

Nov 24, 2020 at 6:20 pm #3685593

Rex Sanders
BPL Member

@rex

At 11 oz plus a lever to drive the augur, getting close to rock hammer territory. But a hammer would be much easier to use – with eye protection.

Like this “lightweight” model from Estwing with a 13 oz head:

https://www.estwing.com/collections/geological/products/lightweight-rock-pick

— Rex

Nov 24, 2020 at 6:46 pm #3685602

David Gardner
BPL Member

@gearmaker
Locale: Northern California

My first thought when reading the OP was the Estwing but I wasn’t sure how much it weighed. Are you taking an ice axe anyway? Some have replaceable picks so you could take an extra hardened steel tip. Like the Corsa Nanotech Ice Axe with a claimed weight of 8.8 oz on closeout sale at REI now for $120. Light, but you could pound on the adze with a fat branch.

Nov 24, 2020 at 6:52 pm #3685606

Roger Caffin
BPL Member

@rcaffin
Locale: Wollemi & Kosciusko NPs, Europe

OK, OK, C4 might be going a bit far, but what about a couple of simple detonators? No C4, just the dets. Lay on ice, stand back, trigger. Fractured ice.

Cheers

Nov 24, 2020 at 6:54 pm #3685608

David Gardner
BPL Member

@gearmaker
Locale: Northern California

Pack some mud on top of the detonators first and it will greatly multiply the effect, but get behind something before it goes off.

Nov 24, 2020 at 7:14 pm #3685612

Philip Tschersich
BPL Member

@philip-ak
Locale: Kodiak Alaska

Mud? Everything is frozen, that’s the problem.

Maybe a powerful laser…

Nov 24, 2020 at 10:14 pm #3685642

Eugene Hollingsworth
BPL Member

@geneh_bpl
Locale: Mid-Minnesota

A heavy, short knife would have less weight penalty than a hatchet or hammer and get you through 3 inches of ice. I carry a BK2 now in the winter instead of a hatchet. (And always the appropriate size folding saw depending on the hike goals.)

yeah, it’s a 16 oz weight penalty…

Nov 24, 2020 at 10:17 pm #3685643

Ryan Jordan
Admin

@ryan
Locale: Central Rockies

@geneh_bpl do you pound the knife in, or drive it in with some type of hammer? Or chip out ice chunks that then need melting?

Nov 24, 2020 at 11:58 pm #3685650

Jeffs Eleven
BPL Member

@woodenwizard
Locale: NePo

Build a fire on the ice

Nov 25, 2020 at 12:00 am #3685651

Ryan Jordan
Admin

@ryan
Locale: Central Rockies

I’m not opposed to the idea of building a fire on the ice, but we are under Stage II until 11/30…wild times here. No snow, iced rivers, super low moisture % in the wood. I’ve never seen it like this.
Author

Posts