Pulk or not to Pulk….

I would use a pulk on consolidated snow and non-technical terrain. Deep powder snow would probably present a challenge as the pulk sometimes has a tendency to nosedive in such conditions.

Of course, I’m using a home-made pulk + harness system so I have no idea how superior the mega-buck systems are in comparison.

Never weighed it as weight really isn’t a consideration with a pulk. Your load will eclipse any potential ounce savings you could hope to achieve using UL materials… but my guess is 4 lbs for the plastic sled (Canadian Tire), 3 lbs for the rods and front cross braces (from Home Depot), 1.5 lb for the harness (retired alpine full body harness)… so… 8.5-9 lbs.

Again, the weight of a pulk really isn’t a big consideration.

Nope, didn’t follow any online guides. Just winged it. The most important component in my experience is the rods. They must be absolutely stiff (metal). I tried PVC tubing first and it either flexed too much, was too bulky, or shattered in extreme cold. Also, a good durable tarp overtop your gear and a way of fastening it to the sled is paramount unless you want to be lugging extra weight in snow-chunks.

I use the pulk to cart around my double ropes, ice screws, tools, gourmet lunch… when I’m ice climbing in Northern Ontario. Hoping to use it in Temegami this season too… the “Little Siberia” of Ontario.

You have identified one win of pulks (ventilation).

The other advantage is that you can comfortably carry a lot in a pulk. I’ve carried for two weeks in full-on winter conditions (late February in British Columbia) with a pulk. My back hurts to think how much that would have hurt (aside from being impossible to ski with) with that on a pack.

Having said that, pulks are lame in tight trees, downright dangerous on steep traverses, and require special considerations for glacier travel.

Some of the commercial pulks have brakes like alpine skis. These are a good idea. A better idea is to attach old climbing skins to the bottom of the pulk — that way it is easy to power straight up a steep hill (remember, traversing is a bad idea with a pulk).

Tony-
The fiberglass pole pulks I describe at http://www.skipulk.com weigh about 10-11 lbs (6 lbs for the sled, 3 lbs for the poles and 1 lb for the harness.

I disagree with the previous posts about traversing. With good poles and fins (skegs) to keep your load from side slipping it is possible to traverse moderate angle slopes well.

The fins do create a bit of a dilemna- They ad to the control on side hills and downhills but ad a bit of drag on the uphills. Adjustable fins would be best ( I am working on this….) Some of my colleagues use removeable fins.

By crossing your poles it is also posible to track through some pretty dense forests. The crossing delays your pulk long enough that it follows in your tracks instead of short cuttng the corner. There are limitations to tight spaces but there are limitations with a pack as well.

The only times I have felt the pulk creates disadvantages over a pack are:
1. Open stream crossings.
2. Exposed rocky knife edge type ridges
3. Extremely steep snowfields where weight is needed over the skins.

Thanks for the opportunity to ad my comments.